P&P Engineering is proud to introduce our 2nd Gen Frontier Front bumpers.
Our full plate front bumpers combine a plated center section with a strong high-clearance outers to bring you a strong, functional and lightweight package. Every bumper integrates a 20" dual row lifetime warranty light bar that mounts in the nose of the bumper which looks great and protects the light bar from damage.
The mounting system, bumper, radiator skid and fill panel come in right around 120lbs.
Our Frontier bumpers bolt on in multiple pieces for ease of installation. Starting with a core unit which contains all the mounting to the truck and the winch plate. The winch is then loaded the winch onto the core. Finally the bumper bolts onto the core. This is a much easier way to install everything on the truck. No longer wrestle the whole heavy unit up on the truck with the winch mounted.
Our core mounting utilizes the 2 threaded bolt holes (per side) on the vertical face of the frame holding the factory bumper bar, the 2 threaded bolt holes (per side) on the underside of the frame holding the oem tow hook, and an additional horizontal through hole behind the front body mount. This is this strongest bolt on mounting of any bumper on the market and is ideal for winching strength.
These bumpers require some cutting and modification of the stock vehicle if equipped with the single piece plastic front bumper. All our brackets bolt on, without modification, using the OEM holes in the frame rails. They do not require any cutting, welding or drilling of the frame.
Bumper comes as a full package with radiator skid, bolt on fill panel and 20” light bar. An optional engine skid or tie panel that fits with other companies engine skids can be added. Black powder coat can be added if you would like the bumper to arrive ready to install.
Core mounts and fill panels are body lift specific (suspension lifts do not affect this bumper or mounting). We will need to know if you have a body lift, and what size, in the drop down section.
Every bumper uses 1/4" steel for the main mounting, winch support, gussets and bumper brackets, 3/16 CNC cut steel main body and 1.75" DOM round tubing - Never weaker HREW(seamed tube).
All products at P&P Engineering are MADE IN USA by hand to order by trained craftsman who take pride in their work. This means there is typically *****APPROXIMATELY***** a 6-10 week lead time on bumpers. You will receive a confirmation email at time of your order and later a shipment email with tracking information when your order ships.